Suits 16:9 hd Video CamerasThis product data sheet is originally written in English. The SmallRig Sunhood for Sony a7S III, a7C, ZV-1, and FX3 retails for $12.90 USD. 25.4,Hoodman HD-300 LCD Hood for 2.5 - 3 inch Screen. When not in use it can be folded flat for easy transport and storage. The Sunhood is fastened to the camera’s LCD screen via a hook and loop. You can fully articulate the screen with the sunhood on, with the only caveat being the fact that you can only use it when the LCD screen is flipped out. The inner layer is made of microfiber cloth which is claimed to reduce light reflections. It features a four-sided hood design and the outer layer is made from what SmallRig is claiming to be durable, scratch-resistant, and sun-proof leather. The SmallRig Sunhood for Sony a7S III, a7C, ZV-1, and FX3 was designed to make viewing your camera’s LCD screen a little easier when working outdoors in bright environments. Can be folded flat for transport and storage.Raised internal edges for stability and to prevent twisting.Slide-in mounting, fastened by hook & loop.Reduces reflections during shooting and shades the screen.The DT LCD Shade is made of a durable carbon-fiber composite material that is light and flexible has been tested down to -20º C (-4º F) for several hours (we expect that it would perform well at lower temperatures, but have no capacity to do real-world testing below that temperature) and up to 70º C (160º F). Contax 645 with Standard 90º Viewfinderįor testing on other bodies please contact us.Phase One XF with + Standard (90º) Viewfinder.Contax 645 with Waist Level Viewfinder (but not the Standard 90º Finder).Phase One XF with Waist Level Viewfinder (but not the Standard 90º Finder).Tech camera bodies such as those from Arca Swiss, Cambo, and the Phase One XT.It has tested with and is compatible with: The DT LCD Shade is compatible with any body that does not physically block its attachment. All mounts (Hasselblad H, Hasselblad V, Contax 645, and Phase One / Mamiya) are compatible. The DT LCD Shade for the Phase One IQ is compatible with all IQ1, IQ2, and IQ3, and IQ4 series digital backs. And don’t worry, in this storage configuration it safely clears (and so does not interact with) the safety release for the digital back!īest yet, the DT LCD Shade is made of a flexing carbon fiber composite material so it is strong and durable, but feather light (~1 ounce). When you’re done with your shoot the DT LCD Shade can be slid onto the IQ backwards, meaning it doesn’t take up any extra space in your pack. In either orientation it does not block access to any port or button on the Phase One IQ you can continue to use the silver hard buttons and touchscreen on the back, and plug in cables to all ports on the side. Low Angle Viewing: with the longer edge at the bottom, such that it can be seen from a higher angle.Standard Viewing: with the longer edge at the top, to block light from the sky and overhead lights.It is so precisely designed that it snaps firmly onto the back by friction alone, and holds solidly there is no need for any adhesives or to lock/unlock it. The DT LCD Shade for the Phase One IQ reduces glare and reflections on the touch screen of any Phase One IQ series back. USB, Ethernet, FireWire, and HDMI Cables for Phase One and Mamiya (13).Certified Pre-Owned Phase One Bodies (2).Certified Pre-Owned Phase One Lenses (10).
0 Comments
Leave a Reply. |